Traeger Industry Components GmbH
Am Steigacker 26
D- 92694 Etzenricht
Phone +49 961 48 23 0 0
Fax +49 961 48 23 0 20

  • Schrift vergrößern
  • Standard-Schriftgröße
  • Schriftgröße verkleinern
Start Industrial Ethernet S7-LAN / MPI-LAN (english)

S7-LAN / MPI-LAN (english)

s7-lan-24v S7-LAN - smales gateway for Industrial Ethernet - TCP/IP - for every kind of Simatic-S7
    • each kind of  SIMATIC - S7 gets connected with ethernet / TCP/IP, fast and easy to install
  • compatible with CP 243 / 343 / 443 -1
  • programming with STEP 7 over TCP/IP, driver for STEP 7 software is included
  • programming and visualization simultaneously (8 connection at same time)
  • compatible woth S7-TCP/IP (RFC1006), WinCC und our IP-S7-LINK driver
  • no need to change hardware config of the PLC
  • with Profibus and  S7 300 faster communication than CP 343-1!
downloadDemo/Documentation pdforder data / price list

operation / use
s7lan-cpreplace

The S7-LAN module is connected directly to the MPI or Profibus interface of the SIMATIC S7. The device has the shape and size of a Profibus connector. In addition, the module has a quasi "piggyback" Profibus connection. In this way S7-LAN can be easily integrated into existing MPI / Profibus network. In the module  of the ethernet RJ45 connector is integrated. Thus S7-LAN is a very compact and small device. Two LEDs are displaying  the functional state of the module.

configuration

Each S7-LAN module gets its own IP address. This address enables the connected S7-MPI/Profibus networkk be achieved. The IP address can be fixed, or obtained from a DHCP server. The operation of the router (gateway) is possible. The configuration is done in a simple way via the S7-LAN manager for Windows and the integrated web server. This software is included.

operation with the STEP 7 software

s7lan-pg

For programming with STEP 7 in specially developed driver included. S7-Lan, we thus directly addressed by the step S7 software. Those who wish can also a virtual comport. Both drivers are included

visualization  / SCADA runs parallel

s7lan-ophmi

S7-LAN can be operated in the so-called CP mode (communication processor mode). Then, the device behaves like a CP343-1. Immediately visualizations such as WinCC (SCADA) or common OPC server data exchange with S7.


 

watching of PLC's variables over integrated WEB interface

s7lan-hmintegrated

 

watch variables of the PLC without operation panel
use the integrated WEB interface

 

 


specification
supply voltage 24 V/DC +/- 20%
power consumption 2 watt
display WEB interface
two status LED's
configuration / handling WEB interface
manager software (included)
interfaces to the PLC: PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC: PD/diagnosis jack
10/100BaseTX RJ45-ethernet jack
galvanic separation 1500V PPI/MPI/Profibus to the PC
operating temperature 5 - 55°C
case ABS-plastic case
dimensions 65 x 43 x 17 mm
operating system MS-Windows NT,2000, XP, Vista, 7 or other like linux with S7-TCP/IP driver IP-S7-LINK


order number designation

9352-LANCon

 S7-LAN Modul
9352-LAN MPI-LAN Cable